Notice
Parts/Testing Equipment
Decoder Programmer
Programming a station decoder is as easy as pressing a few buttons. This unit can also test for correct station number programming, and set station numbers in the red Universal Senders (that get connected to the controller’s terminal strips). Operates using AC power or DC (car battery) with optional battery inverter.
Digital Clamp Meter
Troubleshoot 2WIRE (and multi-wire) system
field wiring by measuring volts, current and
resistance. Features easy-to-read digital
display, 200-hour battery life, and auto power
off after 10 minutes. Requires 2 AAA batteries.
| • | Spec: | Autoranging |
| • | AC Amps: | 60mA, 600mA, 10A, 100A |
| • | AC Volts: | 600V, Resolution 0.1V |
| • | DC Volts: | 600V, Resolution 0.1V |
| • | Resistance: | 1K Ohm, Resolution 0.1 Ohm |
| • | Frequency: | 0-100Hz, Resolution 0.1Hz |
Faultfinder Transformer
Adds proper voltage to two wire path. Use with the Digital Clamp Meter for troubleshooting system field wiring
- AC voltage: 30V
- AC current: 5A