- Mange up to 48 stations using the ICC 2Wire Module or manage existing stations up to 24 on conventional multi-wire and the balance on 2Wire
- Simple & low-cost entry into 2Wire technology
- Uses all of the programming functions of the ICC including accessories such as a hand-held remote or rain sensor
Overview
Expand quickly up to 48 stations – even in remote areas. The Underhill ICC 2Wire module can combine your existing ICC-controlled multi-wire system to add new stations. Simply install the 2Wire Decoder Module and run a new or use existing field wire to new valves and operate your ICC using all of its programming capabilities. It’s just 2 easy!
Features
 |
Typical applicationsLarge residential estate, light commercial, & commercial |
 |
Use all of the ICC Programming FunctionsUse the power and ease of the ICC controller to manage all stations whether its used as a hybrid (multi-wire and 2Wire) or 2Wire only. This includes the ability to use the hand-held remote and rain sensor accessories. |
|
Built-in Decoder ProgrammingProgram decoders using the ICC 2Wire module |
Ordering
Ordering Information & Dimensions
| Part # | Description | Dimensions | |
| ICC Decoder 2Wire Module | |||
| TW-ICC-48 | 2Wire Decoder Module to convert a Hunter ICC controller from 1-48 stations. Use as a hybrid or 2Wire controller or both. Module has decoder programming function | 2-1/2” x 4” x 1-1/2” | |
| Decoders | |||
| TW-TK-DEC-1 | 2Wire Single Station Decoder Module | 1-1/2” x 1-7/8” x 1” | |
| (Optional) Portable Programmers | |||
| DEC-PROG-115 | Portable Programmer for Decoders/Senders 115V power supply | 5.5” x 4” x 1.25” | |
| DEC-PROG-240 | Portable Programmer for Decoders/Senders w/ 240 power supply | 5.5” x 4” x 1.25” | |
Specifications
| Station Count | Manage up to 48 stations, Dedicated MV (normally closed) output Dedicated rain sensor or hand-held output |
| Programming Functions | 4 programs, 8 start times, single station manual, program manual operation, seasonal adjust, hand-held remote compatibility |
| Electrical Specifications | 32 VAC - Maximum AC Input voltage for Decoder Module 1.0 Amp - Maximum Continuous 2-wire main cable current 0.6 amps, (600 mA) - Maximum continuous solenoid current |
| Case Material | Virgin ABS plastic injected molded case |
| Decoder Module Dimensions |
2.5” h x 4” w x 1-5/8” d |
| Weight: | 0.25 lbs. (0.11 Kg) decoder module only |
